conveyor type fusing machine In Andaman_and_Nicobar
Fusing
Machine
Features
Optimum adhesion.
High
pneumatic pressure performance.
State of
the art ‘low temperature-high pressure technology’ for problem free fusing off
difficult fabric without cloth distortion.
Multipurpose
machine.
Double
rivet belt guiding system that ensures belt joint is tension free.
Manual
handle for recovery of fabric in case of power failure.
Inspection
table and noiseless cooling device.
Power
Saving.
AG-700 DRR
Fusing Machine Curing Machine
Features
It has
special crystallization technology in which the fabric moves from 150 degree C to 30 degree C directly. The crystals thus
formed in the fused fabric make it softer and enhance the peel strength by many
folds.
AG-FA-1100
Fusing Machine Curing Machine
Features
Dual type
which is applicable for fusing and curing purpose.
Manual
handle is equipped for taking-out fusing material during electricity failure.
Converted
easily by switch from fusing to curing mode and vice versa.
Designed
specifically for fusing.
Convenient
to use with perfect fusing wide working range.
Automatic
belt control with right and left.
Micro
sensors at the end of the roller.
Roller-rewinding
function optional.
Fully
automatic belt deviation control.
Model
AG-FA-800
AG-FA-1100
AG-FA-1600
Voltage
220v 1ph/415v 3ph
220v 1ph/415v 3ph
220v 1ph/415v 3ph
Motor
DC 0.5 HP
DC 0.5 HP
DC 1 HP
Power Consumption
9.5 kw
14.5 kw
24 kw
Temperature
0-250 degree C
0-250 degree C
0-25 degree C
Speed Control
15m/min
15m/min
16m/min
Air
2-6 kg/cm2
2-6kg/cm2
2-6kg/cm2
Max. Pressure
8 kg/cm2
7 kg/cm2
6 kg/cm2
Dimension (in mm)
3237*1300*1485
4670*1420*1485
4850*2000*1485
FA DDR models are
available with double silicon rollers and refrigeration system.
AG-700 Fusing Machine
Continuous Flowmatic Fusing Machine With Air
Cooling System, Turbo Heating System, Pneumatic Pressure Up To 9kg/Cm2 Low
Temperature High Pressure Technology
Designed for all type of
Customized Garment / Leather
Model
AG – 700
AG-700 DR
AG-700 DRR
Power KW/H
3-4 Kw/hr
5-6 Kw/hr
5-6 Kw/hr
Maximum
Pressure
8-9Kg/cm2
8-9Kg/cm2
8-9Kg/cm2
Voltage
415V3 Ph
415V3 Ph
415V3 Ph
Temperature range
0-250° C
0-250° C
0-250° C
Overall size
2525X1190X1415
2525X1190X1415
2525X1190X1415
Low
temperature – high pressure technology for that enables fast glue line
penetration for optimum bonding to prevent any kind of distortion even on
delicate fabrics.
Fully
Automatic pneumatic belt control system that ensures that belt will not
lean and run smoothly without any problems.
Very
effective for shirt fusing and fusing delicate fabrics: Max. Pressure on
these machines is 9kg/cm2
and is very effective for fusing of shirts where double fusing is required at
one time. In other small machines, the
fabric has to be passed twice for double fusing.
Individual
PID temperature controls for upper and lower heaters that enables precise
settings of upper and lower temperatures. This is very useful for sensitive
fabrics.
Double
silicon roller
Precise speed and pressure digital controls.
Seamless
Belt (also called endless belt or belt without joints). Much better
strength than belts with joints.
PID
Digital Temperature Controller to set constant temperature for uniform and
optimum bonding. belt temperature, heating temperature & glue line temperature
can be set as per your buyer’s requirement.
Individual on off system for lower heaters for
fusing of sensitive fabrics where
lower heating is not required.
Air
Cooling system at the receiving end of the machine which gives better peel
strength to the fabric & interlining and prevents the finger marks or any
other type of distortion of the fabrics.
Inspection
table at loading area so that any fabric defect can be checked &
stripes or check garment matching of the fabric & fusing is much
convenient.
Auto
Stop: Automatic Cooling System which cools the machine before completely
stopping to prevent the belts from burning or getting damaged.
Overheating automatic switch off
Pneumatic Pressure Control for precise pressure settings.
Belt Cleaner System attached.
Energy efficient and low
maintenance
AG- 700 DR/ DRR Model
It has special crystallization technology in which the
fabric moves from 150 degree C tp_30 degrees directly. The crystal thus formed in the fused fabric make
it softer and enhance the peel strength by many folds.
AG-1200
Swarovski/ Beads/
Embroidery/ Continuous Flowmatic Foiling Work
transfer machine with special silicon springs in silicon rollers for additional
cushion and high friction, as well as low-temperature transfer technology. For
sensitive fabrics, a larger feeding area is available. For improved
performance, use the cooling system. Turbo Heating System/ultra
led for Low Power Consumption, Built for All Forms of High Fashion Garments
Low
temperature, high pressure technology allows for fast glue line penetration and
optimal bonding, preventing any distortion, even on fragile fabrics. Completely
automatic pneumatic belt control system guarantees that the belt does not lean
and runs smoothly and without issues. Quite effective for fusing delicate
fabrics and shirts: These machines have a maximum pressure of 8-9 kg/cm2 and
are very good for fusing shirts when double fusing is expected at the same
time. The cloth must be passed twice in other small devices for double fusing.
Upper and lower heaters both have their own PID temperature sensors, allowing
for accurate temperature regulation
Double silicon roller
Precise speed
and pressure digital controls.
(also called
endless belt or belt without joints). Much better strength than belts with
joints.
to set constant temperature for uniform and optimum bonding. belt
temperature, heating temperature & glue line temperature can be set as per
your buyer’s requirement.
Individual on
off system for lower heaters for fusing of sensitive
fabrics where lower heating is not required.
at the receiving end of the machine which gives better peel strength to the
fabric & interlining and prevents the finger marks or any other type of
distortion of the fabrics.
so that any fabric defect can be checked & stripes or check garment
matching of the fabric & fusing is much convenient.
Automatic
Cooling System which cools the machine before completely stopping to prevent
the belts from burning or getting damaged.
Pneumatic Pressure Control for precise pressure settings
Pneumatic Pressure Control for overheating automatic shut off.
Attached Belt Cleaner System. Low-maintenance and
energy-efficient.
Fusing Machine AG-1200/ AG-1600/ AG-1800
Features- AG-1200
Low temperature – high pressure
technology for that enables fast glue line penetration for optimum bonding
prevent any kind of distortion even on delicate fabrics.
Energy efficient and low maintenance.
Belt cleaner system attached.
Pneumatic pressure control for
precise pressure settings.
Overheating automatic switch off.
Auto Stop: Automatic Cooling system
which cools the machine before completely stopping to prevent the belts from
burning or getting damaged.
Inspection table at loading area so
that any fabric defect can be checked & stripes or check garment matching
of the fabric & fusing is much convenient.
Air cooling system at the receiving
end of the machine which gives better peel strength to the fabric &
interlining and prevents the finger marks or any other type of distortion of
the fabrics.
Individual on off system for lower
heaters for fusing of sensitive fabrics where lower heating is not required.
PID Digital Temperature Controller to set
constant temperature for uniform and optimum bonding. Belt temperature, heating
temperature & glue line temperature can be set as per your buyer’s
requirement.
Precise speed and pressure digital controls.
Seamless Belt (also called endless belt or
belt without joints). Much better strength than belts with joints.
Double silicon roller.
Individual PID temperature controls for upper
and lower heaters that enables precise settings of upper and lower temperature.
This is very useful for sensitive fabrics.
Very effective for shirt fusing and fusing
delicate fabrics: Max. Pressure on these machines is 9 kg/cm2 and is very
effective for fusing of shirts where double fusing is required at one time. In
other small machines, the fabric has to be passed twice for double fusing.
Fully Automatic pneumatic belt control system
that belt will not lean and run smoothly without any problems.
A Multipurpose machine which effectively performs the
following operation:
Fusing in all kinds of leather
Laminating leather
Leather foil Printing on all kind of
leather
Dual type which is applicable for
fusing and curing purpose
Manual handle is equipped for taking
out fusing material during electricity failure
Converted easily by switch from
fusing to curing mode and vice versa
Designed specifically for fusing
Convenient to use with perfect
fusing, as available a wide working range
Automatic belt control with right and
left
Micro sensors at the end of the
roller
Roller-rewinding function optional
Fully automatic belt deviation
control
Features-AG-1600
Low temperature – high pressure
technology for that enables fast glue line penetration for optimum bonding
prevent any kind of distortion even on delicate fabrics.
Energy efficient and low maintenance.
Belt cleaner system attached.
Pneumatic pressure control for
precise pressure settings.
Overheating automatic switch off.
Auto Stop: Automatic Cooling system
which cools the machine before completely stopping to prevent the belts from
burning or getting damaged.
Inspection table at loading area so
that any fabric defect can be checked & stripes or check garment matching
of the fabric & fusing is much convenient.
Air cooling system at the receiving
end of the machine which gives better peel strength to the fabric &
interlining and prevents the finger marks or any other type of distortion of
the fabrics.
Individual on off system for lower
heaters for fusing of sensitive fabrics where lower heating is not required.
PID Digital Temperature Controller to set
constant temperature for uniform and optimum bonding. Belt temperature, heating
temperature & glue line temperature can be set as per your buyer’s
requirement.
Precise speed and pressure digital controls.
Seamless Belt (also called endless belt or
belt without joints). Much better strength than belts with joints.
Double silicon roller.
Individual PID temperature controls for upper
and lower heaters that enables precise settings of upper and lower temperature.
This is very useful for sensitive fabrics.
Very effective for shirt fusing and fusing
delicate fabrics: Max. Pressure on these machines is 9 kg/cm2 and is very
effective for fusing of shirts where double fusing is required at one time. In
other small machines, the fabric has to be passed twice for double fusing.
Fully Automatic pneumatic belt control system
that belt will not lean and run smoothly without any problems.
Features-AG-1800
Low temperature – high pressure
technology for that enables fast glue line penetration for optimum bonding
prevent any kind of distortion even on delicate fabrics.
Energy efficient and low maintenance.
Belt cleaner system attached.
Pneumatic pressure control for
precise pressure settings.
Overheating automatic switch off.
Auto Stop: Automatic Cooling system
which cools the machine before completely stopping to prevent the belts from
burning or getting damaged.
Inspection table at loading area so
that any fabric defect can be checked & stripes or check garment matching
of the fabric & fusing is much convenient.
Air cooling system at the receiving
end of the machine which gives better peel strength to the fabric &
interlining and prevents the finger marks or any other type of distortion of
the fabrics.
Individual on off system for lower
heaters for fusing of sensitive fabrics where lower heating is not required.
PID Digital Temperature Controller to set
constant temperature for uniform and optimum bonding. Belt temperature, heating
temperature & glue line temperature can be set as per your buyer’s
requirement.
Precise speed and pressure digital controls.
Seamless Belt (also called endless belt or
belt without joints). Much better strength than belts with joints.
Double silicon roller.
Individual PID temperature controls for upper
and lower heaters that enables precise settings of upper and lower temperature.
This is very useful for sensitive fabrics.
Very effective for shirt fusing and fusing
delicate fabrics: Max. Pressure on these machines is 9 kg/cm2 and is very
effective for fusing of shirts where double fusing is required at one time. In
other small machines, the fabric has to be passed twice for double fusing.
Fully Automatic pneumatic belt control system
that belt will not lean and run smoothly without any problems.